Dent Remover Bar

  • $39.99
  • Save $25.00


The Dent Remover Bar is a lightweight glue tab pulling tool which is suitable for all kinds of cars dent removal. It also works for truck, motorcycle, washing machine, refrigerators, hail damage and so on. By eliminating the labor cost and paint material cost, Dent Remover Bar is exactly designed to save your time and money. 

Specifications:
Slide Hammer Color: Silver
Puller Tabs Color: Blue
Material: Metal
How to use this paintless dent repair kits
1. Clean the dent with a clean wet cloth;
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3. Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue;
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backward to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Packing lncluded:
18x PDR Glue Pulling Tabs
1x 2 in 1 Dent Removal T Bar Tools

 

 

 

 

 

On the fence about this Dent Remover Bar? Don't be. Let our satisfaction guarantee address your concerns.

Inventory Last Updated: Oct 21, 2019

We Also Recommend