Number Plate Frame Reverse Camera
| Features & Specifications | |
| Rear View Camera： | |
| Chip | The South Korean PC1030 chip |
| Image Sensor | 1/3 " Color CMOS |
| Effective Pixels | PAL 512(H)X582(V); NTSC 512(H)X492(V) |
| Horizontal Resolution | 420 TVL |
| Minimum Illumination | 0.1Lux |
| Lens | 1.9mm/120 degrees |
| Synchronization | Internal synchronization |
| Signal to noise ratio | >48db |
| Signal System | PAL/NTSC |
| Electronic Shutter | Auto |
| Video Output | RCA interface, 1.0Vp-p, 75Ohm |
| White Balance | Auto |
| Backlight Compensation | Auto |
| Power | DC 12V |
| Current Consumption | 50-60mA, Max 130mA with IR on |
| Operating Temperature | -20~+60, RH95% Max |
| Storage Temperature | -30~ +80, RH95% Max |
| Video cable length | 6m |
| Power supply cable length | 1.5m |
| 2.4G Wireless Kit: | |
|
Easy installation Take one minute get your camera become a wireless camera Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation) Work Range: Up to about 80m(Hollowness) Connects to rear-view camera and front video screen Power: DC 12V Transmitter/Receiver Cable Length:1.5m Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit. Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end. The transmitter also includes a handy pass-through for the power so you can connect it inline with your camera. Wireless transmitter with male phono plug and male 2.5mm power plug for supplying power to the camera. Wireless receiver with male phono plug for connection to monitor . |
|
| Package Contents | |
|
1 x Car Rear View Camera 1 x transmitter 1 x receiver 1 x user manual |
|
Inventory Last Updated: Feb 27, 2021
